Manuals & guides

S1 supports Smart Life app control and the supplied remote control.

• For app setup, use a strong 2.4 GHz Wi-Fi connection and keep the phone within 1 meter of the robot.
• Turn on Bluetooth, then follow the Smart Life app pairing steps after the float indicator flashes red.
• To pair the remote, power on the robot and remote, press the float's left button twice, then press any remote button.

Follow the S1 guide before the first cleaning cycle.

• Fully charge the robot before first use, then replace and tighten the charging-port cover.
• Install the float securely before placing the robot in the pool.
• Press the power button to turn on the robot; it starts in automatic mode by default.

Use the guide for your exact model as the complete setup reference.

• Charge the cleaner fully before first use; a full charge takes about three hours.
• Hold the red button on the underside for three seconds to power on.
• Place the cleaner slowly into the pool; do not throw it.
• When the battery is low, retrieve the cleaner after it moves toward the pool wall.

Prompt filter-basket care helps keep cleaning performance consistent.

• When retrieving with the float, bring the robot up slowly and lift it out by the handle.
• Remove and rinse the filter basket after each cleaning task; do not use a brush on it.
• For off-season storage, power off, clean and dry the robot, then store it in a cool, ventilated place and recharge it every two months to 40% to 60%.

Use these quick-guide checks when caring for the cleaner.

• Power off before inspecting or cleaning the propeller.
• Inspect and clean the propeller about every two months.
• Dry the charging port before charging and replace its silicone plug afterward.
• The battery is not user-replaceable; contact support when battery service is needed.

Keep the pool clear and follow the full S1 instruction manual for safe operation.

• Keep people and animals out of the pool while the robot is operating.
• Use only the supplied battery and charger, and keep the charging port dry.
• Do not use S1 on pool steps or walls made from soft or flexible materials.

Follow the full X1 instruction manual and local electrical requirements.

• Use the cleaner on flat pool floors and keep people out of the pool while it operates.
• Keep the charging port dry and use only the supplied charger.
• Disconnect power before cleaning, inspection, or maintenance.

Simple charging and debris checks resolve many common symptoms.

• Confirm the charging port is dry and free of debris.
• Recharge the cleaner if the indicator does not light.
• Contact support if the indicator remains off after charging.

The S1 instruction manual states a one-year warranty and lists Poolease support contact details.

• Keep your proof of purchase and the model information for support requests.
• Contact poolease-service@outlook.com if you need help with the cleaner.

The source guides state a one-year limited warranty for the original purchaser covering defects in materials and workmanship.

• Keep your proof of purchase and record the model shown on the underside label.
• Send support a clear photo of the model label when you need identification help.